PLASTERS

Hard plaster type III (ISO 6873).
Preparation of working and situation models.
Can be used for masks and casts/counter casts in moulds.

Technical characteristics:
  Mixture • 100 g powder/ 30 ml water
  Mixing time • 30 sec (mechanical mixing) - 60 sec (manual mixing)
  Setting time • approx. 10 min
  Expansion on setting • max 0.20%
  Resistance to compression after 24 hours • min. 30N/ mm2
  Working temperature • approx. 23°C
  Working time • approx. 6 min.

Hard plaster type III (ISO 6873)
TOP QUALITY for removable prostheses. Greater hardness and resistance to abrasion.
High quality models, excellent results.

Technical characteristics:
  Mixing ratio • 100 g powder/ 26 ml water
  Mixing time • 30 sec (mechanical mixing) - 60 sec (manual mixing)
  Setting time • approx. 10 min
  Expansion on setting • max 0.15%
  Resistance to compression after 24 hours • min. 35N/ mm2
  Working temperature • approx. 23°C
  Working time • approx. 4 min.
  Colour • yellow

Extra hard plaster for type IV (ISO 6873). Preparation of removable die, antagonist models.
Excellent results in the realisation of models for removable and castpartial denture.
High resistance to abrasion and compression.

Technical characteristics:
  Mixing ratio • 100 g powder/ 20 ml water
  Mixing time • 30 sec (mechanical mixing) - 60 sec (manual mixing)
  Setting time • approx. 9 min
  Expansion on setting • max 0.10%
  Resistance to compression after 24 hours • min. 60N/ mm2
  Working temperature • approx. 23°C
  Working time • approx. 4.5 min.
  Colour • light brown

Insulating material for plaster.
Rapid absorption.
Creates a thin, resistant film between the plaster and the resin.
The solution penetrates the plaster in depth and completely obstructs the micro pores without varying the dimensions of the model.

Extra pure, arsenic free temporary filling material to be used in conjunction with Eugenol
Available in: 110g bottle - Multiple pack 100g x 30.

Extra pure viscous liquid with powerful odour of cloves.
Desensitising agent for dentine and is also used with Zinc Oxide as temporary filling material.
Available in: 15ml and 110ml bottle - Multiple pack 15ml x 12
Multiple pack 110ml x 12